Hakko FX-951- Part 4 - “Turn down that pesky LOUD beep”, but don’t turn the beeb off.

Описание: I personally like the beep to tell me when my irons reaches temperature, but I think it’s way to loud. So in this video I show you how to dampen the sound of that Hakko FX-951 beep. I left the paper backing on the opposite side of the tape, and only removed it from the side pressed onto the speaker.
Yes, you can turn if off in the newer firmware with option 5, but I don’t want to turn it off. I just did not want it as loud as it was.

The speaker is 0.45 inches in diameter, so you can used the 1/2 inch tape, or 1 inch and just trim it back. Mine was originally the 1 inch wide tape that I cut back so only the corners of the tape overlapped off the buzzer.
The 3M tape used was:
3M Urethane Foam Tape 4016 - Off-White- 1/16 inch (0.0625 in. (1.6 mm) open-cell, flexible urethane foam carrier that fills gaps,
provides long-term holding at temperatures up to 220°F (104°C). More then enough to stay on from the heat of the transformer.
I think any of the 3M urethane foam tape should work.
Thisntaoe is also sold as the following items you can search for.
110-3M
Scotch 110 mounting tape
Scotch 4011 tape
Scotch 4016 tape

Other videos in the series are listed below.

Bonus - Because I knew you would ask.
eBay Hakko FX-951 Bonus Tear Down Fake or Real, was it to cheap to be real, let’s see.
   • eBay Hakko FX-951 Bonus Tear Down Fake or ...  

Part 1 - Hakko FX-951-66 Kit eBay Win with 2027 & Micro 2032 unboxing (with one problem)
   • Hakko FX-951-66 Kit Part 1 - eBay Win with...  

Part 2- Repairing the issue with the stand
   • Hakko FX-951 - Part 2 - ”The 2032 Stand Re...  

Part 3 - Bypassing the programming card without permanent modification
   • Hakko FX-951 - Part 3 - "Bypassing the Pro...  

Part 4 - Turn down that pesky LOUD beep”, but don’t turn it off
   • Hakko FX-951- Part 4 - “Turn down that pes...  

Enjoy,
Scott