Shapeoko 2 CNC Kit: Wasteboard Upgrade w/ Threaded Inserts
Автор: Winston Moy
Загружено: 2014-01-29
Просмотров: 47365
Описание:
NOTE: DO NOT use the 9mm hole diameter indicated on the packaging. I've found 8mm (5/16") to be a much better fit. Keep this in mind if you're programming your own holes, or drilling them by hand. And ideally, install them from the bottom. Get a countersink bit in a drill and you can quickly get all the inserts to sit flush by hand.
This is the final step before I can start milling real projects, figuring out how I'm going to do Workholding. There are many ways to tackle this topic, this is just my take. You can research other methods here: http://www.shapeoko.com/wiki/index.ph...
This is part 4 of my Grand Shapeoko Adventure, my journey from noob to Maker.
Here's the threaded insert I got from McMaster: http://www.mcmaster.com/#92105a100/=q...
But after seeing the brand (EZ-Lok), I'm pretty sure you can also find them on Amazon and such for slightly cheaper. Maybe: http://amzn.to/1bbeWi9 ? Double check dimensions to make sure it suits your needs before buying.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
