Change a 3rz engine oil pump # toyota

Описание: In this video we explain the easiest way to change the oil pump for Toyota engines
#engine3RZ
#pump
#hilux
#3RZ
#pump3RZ

Changing the oil pump of a Toyota 3RZ engine requires a bit of mechanical knowledge and experience. Here are the general steps to change the oil pump of a Toyota 3RZ engine:

1. Drain the oil: Before beginning work on the oil pump, you should drain the oil from the engine to prevent oil spills. Locate the oil drain plug under the engine and use an oil pan to catch the oil.

2. Remove the oil pan: Remove the bolts that secure the oil pan to the engine block, then carefully remove the oil pan. Be careful not to damage the gasket that seals the oil pan to the engine block.

3. Remove the oil pickup: Locate the oil pickup tube that is attached to the oil pump and remove it from the engine block.

4. Remove the oil pump: Remove the bolts that secure the oil pump to the engine block, then carefully remove the oil pump. Be careful not to damage the oil pump drive gear that connects the oil pump to the engine.

5. Install the new oil pump: Install the new oil pump onto the engine block and secure it with the bolts you removed earlier. Make sure the oil pump drive gear is properly aligned and engaged with the engine's gear.

6. Reinstall the oil pickup: Reinstall the oil pickup tube onto the new oil pump and secure it to the engine block.

7. Reinstall the oil pan: Clean the gasket surfaces of both the engine block and the oil pan, then reinstall the oil pan and secure it with the bolts you removed earlier.

8. Refill the engine with oil: Refill the engine with the recommended amount of oil and start the engine to check for leaks.

It's important to note that the above steps are general guidelines, and the specific steps for changing the oil pump of a Toyota 3RZ engine may vary depending on the exact model and year of the vehicle. Always consult the vehicle's owner's manual or a qualified mechanic for specific instructions and recommendations.