Flyduino v1.3 RC25 Day 1

Описание: Frame: FB-01 (https://www.californiaquads.net/)
Motors: HyperLite V2 Team Edition 2205-2522

ESC: KISS 24 1.08 DSHOT600 amp esc http://amazon.com/dp/B01NA0G037/?tag=...
FC: Kiss FC v1.3RC25 http://amazon.com/dp/B01FYKYFLU/?tag=...
VTX: Unify Race HF
ANTENNA: TBS Triumph
RC CAM: Swift V2
Lipo: attu R-Line 1300mAh 95C 4S1P Square lipo

Sounds:
Generationals - Black Lemon
  / savorwavs-1  
Under Control - Foster The People
  / under-control-calvin-harris  


This is my first day using RC25. Did a little LOS before this. P gains are just about a couple clicks
over stock (3) and dropped D a little bit. My Yaw P was WAY HIGH!!!!

Adaptive Filter is On which is default.
I went through and turned off all other filters.
Got the latest LUA script and controlling my PIDS and vtx (Unify) through taranis.
You have to solder vtx audio to rx tab on bottom of Kiss FC in the middle of the board.

I do have to say I feel a huge difference in flight control. I think it is similar to when I went
from CleanFlight to BetaFlight. Tune is still not quite there but at least it will be easy to change
values since I can change all PID's and rates through the Radio now. Oh and prop wash? I can't find it anywhere :)

Thanks Flyduino!