Electronic parking brake motor replacement Bentley Continental GT or Flying Spur 2004-2010

Описание: Please note! I DO NOT ADVICE YOU ANYTHING HERE! I am not responsible for anything you can damage in your car. Whatever you will do with your car is your own risk and responsibility! This video is only to show you how do I fix MY Bentley to help you out with the issues I had in case if you have similar.

Once you fit new EPB servo motor, you need to:
1. Clear all Errors first, Keep car connected to the external power source due to ODB diagnostic quite hungry for electricity.
2. If they still not cleared you must run diagnostic again!
3. Once there is no Error codes you have to go back to EBP menu in video and 3 times repeat open /close cycles. I did use brake pads cycle instead of EPB replacement. Follow the on screen instruction, it will tell you when do you need to apply parking brake and when release. Press on brake pedal each time before you apply parking brake!
4. If it doesn't work from computer try from the car switch.
5. Once they calibrated BOTH motors will start working the SAME time. If one motor spins longer then another it means you haven't done calibration properly and you have to repeat the calibration cycle.

Sorry I didn't have a chance to record the calibration process in full just simply because I do it on my own and one hand recording is quite difficult.

Have a happy EPB fixing :)

I bought my DVD service manual here - https://www.ebay.co.uk/itm/297798473367