18 Watt Marshall Plexi Clone (Ceriatone TMB) - Normal Channel - Clean Demo
Автор: imagimotion
Загружено: 2011-05-03
Просмотров: 23450
Описание:
Here's a quick demo of an all hand wired point to point amp I built that is a clone of the classic 1974x Marshall 18 watt amp. It started out as a Triode Electronics kit, but I modified it so that it uses the Ceriatone 18 watt schematic and circuit. I also changed the output transformer from the Magnetic Components to a higher wattage rating Weber transformer, and it eliminated an issue I initially had with the amp being too fizzy when the gain was cranked. It uses all carbon comp resistors and Sozo and Sprague Atom capacitors for the signal path and filtering circuit.
The clip was played through a PRS SE Singlecut on the bridge pickup with the volume initially around 3 or 4 and then cranked to 10 when it gets heavy. The guitar was plugged into the normal channel, and the amp setting was at 12:00 for the tone and the gain. The speaker used for this was an Eminence Legend in a 1x12 enclosure. The audio was recorded with an SM57 close miked going straight into the preamp on a MOTU traveler.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
