Full Installation Oxford Heated Grips on Aprilia Tuareg 660

Описание: Complete installation of Oxford Premium Adventure Heaterz grips directly to the OEM wiring of my 2022 Aprilia Tuareg 660. This allows to use the OEM controls with the TFT display. I base my install on the manual created by    / @motorcycleblog   so thanks to you for making the guide.

Here's a link to the Facebook post with the PDF of the manual:
  / 1322540459091035  

Use these chapters to skip to sections you want
0:00 - Intro
0:36 - Motorcycle Blog manual
0:53 - Tools used - see full list below
1:08 - Step 1 Seat and Battery
1:19 - Step 2 Remove Windscreen
1:59 - Step 3 Remove TFT Display
2:19 - Step 4 Move TFT towards tank
2:51 - Step 5 Cut OEM connectors
3:07 - Step 6-7-8 Wiring
4:35 - Option remove navigation bar
5:02 - Step 9 Test before gluing
5:52 - Step 10 Add electrical tape
7:13 - Option re-route wiring
8:01 - Step 11 Remove hand guard
8:14 - Step 12 Remove OEM grip
8:39 - Step 13 Remove threaded insert
8:59 - Step 14 Test grip position
9:34 - Step 15 Cut excess rubber
10:13 - Step 16 Glue and install Left Oxford grip
10:49 - Step 17 Remove Right OEM grip
11:06 - Step 18 Sand plastic of throttle side handle
11:40 - Step 19 Install right Oxford grip
12:07 - Step 20 Drill holes in dash
13:35 - Step 21 Connect wires
13:46 - Step 22 Re-attach TFT display
13:57 - Step 23 Tie-wrap cables
14:08 - How to cover holes in dash
15:08 - Conclusion

Here are the tools I used
Wire stripper
Allen keys
T25 torx bit
Scissors
Safety knife
Phillips screwdriver
Electrical tape
crimp connectors
Heat shrink tubing
Heat gun
21/32" drill bit
Adjustable wrench
60 grit sand paper
Gorilla glue