UNBOXING 3.0m GLIDER • Django22 L [30] RTF by SANSIBEAR 🐻 • (English/Français 4K)

Описание: #notsponsored
Get yours at https://sansibear.de/product/django22...




🇺🇸 Hi folks 👋🏻🤠

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰

If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends 🤩🙏🏻



🇫🇷 Salut les copains 👋🏻🤠

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰

Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻




📸 Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇️

🎮 Jeti Rx and DS16 ➡️ https://www.opale-paramodels.com/fr/ ‪@OpaleParamodels‬
🔋CNHL LiPo ➡️ https://chinahobbyline.com
✈️ Jets and more ➡️ https://www.turbines-rc.com/fr/?aff=4







🌪️🍊 Django22 L [30] Elektro (RTF version) by SANSIBEAR 🐻

https://sansibear.de/product/django22...

Tail servos : 2 x KST HS08B
Wing servos : 4 x KST HS08A
Fuselage : Cockpit and tail CFC (carbon)
Canopy Rx friendly for antenna 1 and plastic tail servos hatch (bottom fuse) for the 2nd antenna !
Wings : XPS Sandwich Carbon/Glass X-over
Motor : Aeronaut actro-n 28-4-880 with ESC Aeronaut actrocon 30A
Spinner : Aeronaut Z-spinner 38mm
Prop : CAM-Z 12x6

Wingspan (envergure) : 3000 mm
Length (longueur) : 1440 mm
Weight PNP (without Rx, LiPo) : 844gr
Weight RTF CG 80.2 mm with LiPo 3S 1100mAh 30C 77g + 1,27g lead in rear fuselage pipe + Muli6s sensor + Mvario2 : 947gr

⚖️ Parts :
Wingspar + elevator screws : 21gr
Right wing (with 2 KST servos) : 242gr
Left wing (with 2 KST servos) :239gr
Horizontal stab : 20gr
Fuselage, rudder and motor (without Rx) : 322gr



Surface : 55.7 dm²
Wing load (Charge alaire) : 17 g/dm2 (CG 80.2mm)

📏 Settings :

Ailerons : 9mm down / 13mm up
Elevator : 6mm (thermal and normal) / 12mm (speed mode)
Rudder : 17mm

Flaps offset : Speed 2mm up / normal 0 / thermal 3mm down
Ailerons offset : Speed 2mm up / normal 0 / thermal 3mm down
Elevator offset : Speed 1mm down / normal 0 / thermal 0

Snap flaps : 2mm down flaps only
Thermal Flaps camber : 2mm/4mm max

Brakes (Freins) : Flaps 90° / ailerons 10mm up / elevator compensation 5mm down
Launch in speed mode (1mm down elevator) with a Preset (like in F3K) : 1mm down elevator (on a momentary switch)

❌ Book CG : 80.2mm (LiPo 3S 1100mAh 30C 77gr, all the way back + 1.27g lead in rear fuselage pipe)

Max limit average wind 20 km/h (12.3 mph), I won’t fly with more wind 😕

Flights :
Maiden (filmed) :




0:00 Presentation
0:41 OPENING
0:58 Bag
1:11 Wings covers
1:49 Left wing (239g)
3:37 Horizontal stab (20g)
4:30 Fuselage (322g)
6:33 Rudder
7:40 ⚖️ Let's see the weights...
8:52 Flap / aileron connection 😍
9:28 Wingspar + elevator screws : 21gr
9:40 Total : 844g (no liPo, no Rx)
10:42 This is it 🌧️
11:15 Please Subscribe 🙏🏻😍
11:34 CG (LiPo placement) Photos




#glider #rcplane #django #sansibear #f5j #f3k #f3j #jeti #radiocontrol #setup #modellbau #django22 #new #perfect #unboxing #assembly