Lightweight CPAP & Battery for Hiking/Camping with Sleep Apnea

Описание: The following equipment are shown in this video:

Breas Z1 Auto CPAP
The travel-CPAP itself. There is also a Z2 Auto model out at some places, but they are almost identical in function.
https://shop.breas.com/product/z1-auto/
https://www.xn--kpprtt-buad.se/produk...

The following accessories were included with the CPAP when I bought it:
Adapter for connecting a standard 22mm rubber hose connector.
1.2 m (4 feet) hose with 22mm rubber connectors
Q-Tube muffler/silencer
15V 2A (30W) power adapter with 5.5 x 2.1 mm barrel plug (not needed if running from USB-C PD adapter)

Adapter DC 5.5 x 2.1 mm male barrel plug to XT60 male connector
This will allow you to run the CPAP off a LiPo-battery.
https://www.amazon.se/dp/B0BPS4P3N3

Batteries:
1800 mAh 14.8V Li-Po battery - XT60 female connector
https://www.amazon.se/dp/B0BNVLQSRR
2250 mAh 14.8V XT60 Li-Po battery - XT60 female connector
https://www.amazon.se/dp/B09VB5NP2J
4500 mAh 14.8V XT60 Li-Po battery - XT60 female connector
https://www.amazon.se/dp/B0D6L3JM97
10000 mAh 14.8V XT60 Li-Po battery - XT60 female connector
https://www.rynos.se/sv/artiklar/sunp...

Li-Po safety bags:
20 x 10 cm, works for all my batteries up to 4500 mAh
https://www.amazon.se/dp/B07DHPRV7F

19 x 8.5 x 6.5 cm, for my 10000 mAh battery
https://www.amazon.se/dp/B0B56C62KV

Li-Po battery monitor
This is connected to the battery balance connector, and will show the voltage for each cell. It can be configured to beep at a selected low voltage/charge.
https://www.rynos.se/sv/artiklar/liti...
https://www.amazon.se/P%C3%A5litlig-b...
https://www.amazon.se/Lipo-batteri-sp... (this one doesnt have a case, but it is fine)

SkyRC B6neo Li-Pi-charger
I use this only with USB-C PD 20V input, it can charge up to 60W that way. This fully charges my 10000 mAh Li-Po battery from empty in about 2.5 hours.
https://www.skyrc.com/b6neo

USB-C PD to DC 15 V 5.5 x 2.1 mm male barrel plug
This cable contains a small chip that requests 15V from the USB-C power adapter. If the adapter can not support the voltage, the maximum allowed voltage is delivered instead. Leading to the CPAP not powering on correctly. This has happened for me during testing different chargers, but it has not damaged the CPAP, it will just shutdown itself. I recommend also buying a USB-C tester, that can monitor voltage/current/power, this will allow you to troubleshoot if you are having issues with a specific adapter.
https://www.amazon.se/dp/B0C58NV1PL

XT60 male to USB-charger module
For charging a phone off a Li-Po-battery.
https://www.amazon.se/dp/B0BXRMCDK3

XT60 parallel Y-splitter battery-connection - male to 2 female
https://www.amazon.se/dp/B0BL6XLKCK

USB-C PD chargers:
Ugreen Nexode Pro 100W GaN, 2 USB-C + 1USB-A
https://eu.ugreen.com/collections/ugr...
Ugreen Nexode Pro 160W GaN, 3 USB-C + 1USB-A
https://eu.ugreen.com/collections/ugr...
NOTE that when you are using multiple ports at the same time, the voltage/current/power may be limited on some ports. Read specifications carefully what voltages/power are supported in different configurations.

Philips Dreamwear Nasal mask, 22 mm connector
I've used this mask for 5 years, and am very happy with it.