Using BetaFPV's 4S micro motors/FC/ESC/Lipos to make the "CurryPick"

Описание: BetaFPV very kindly sent me over some new 4S capable 1105-5000kv motors along with an FC/ESC board to run them and some 4S lipos. In this video, I attempt to make something to use them.

The parts I used in the video are from BetaFPV were:
The FC/ESC board https://betafpv.com/collections/compo...
1105-5000kv Motors https://betafpv.com/collections/motor...
450Mah 4S lipos https://betafpv.com/collections/4s-ba...

If you prefer the slightly slower (but less tuning needed) idea of 3S lipos, then check these ones out https://betafpv.com/collections/batt-...

I also used (affiliate links in these):
RunCam Micro Swift with 2.1mm lens https://www.banggood.com/RunCam-Micro...
I used an AKK VTX in the video, but would probably replace this with an Eachine Nano https://www.banggood.com/Eachine-NANO...

I printed the Calimero frame https://www.thingiverse.com/thing:359... (obviously you'd need your own 3d printer to do this)

... and also designed my own camera mount for the Swift micro which I've uploaded to thingiverse here https://www.thingiverse.com/thing:381...

If you liked this video and want to show your support please feel free to join my Patreon supporters here   / currykitten   or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714...

If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/