Making a Kitchen Knife: Integral Bolster from Round Bar (Knife Making)

Описание: This project turns a round steel bar into a kitchen knife with an integral bolster and a wide blade. This is a good example of the transformative nature of blacksmithing to turn steel into completely different shapes just using a forge, hammer and anvil. I will take you through all the necessary steps and provide detailed narration. The knife making skills shown here are fairly straight forward and this could be a project for a beginner to intermediate blacksmith. There is even an attempt at hamon to control the differential hardening of a shallow hardening steel.

Pattern Welding Explained T-Shirts:
RedBubble: https://rdbl.co/2BSFDkr
Tee-Spring: https://bit.ly/3hOnhC7

A big thank you to the following Patreon patrons:
Andrew Hecker
Debora Richards
Jon Drud
Lucas Gourbeyre
Nils Anderssen
Rashar Arji
Ryan Hobbs
Wayne Agostino

Patreon:   / nielsprovos  
Subscribe:    / mintwart  
Follow me on Twitter:   / nielsprovos  
Like me on Facebook:   / nielsprovos  

Filmed on a Sony PXW‑FS7. Color grading in DaVinci Resolve.

Chapters:
00:00 Start
00:10 Prolog and Framing
00:39 Kitchen Knife via Magic
01:34 Kitchen Knife as Blacksmithing Project
02:00 Cutting W1 round bar
02:12 Marking location of bolster
02:31 Forging front of bolster
02:49 Establishing blade section
03:08 Broading blade with beveling dies
03:31 Forging tip of the knife
04:07 Moving base of blade towards bolster
04:24 Forging bevels
07:33 Establishing and flattening full tang
08:38 Normalizing blade steel
09:20 Rough grinding the knife
12:06 Finer belt before heat treating
12:53 Removing vertical grinder marks
13:39 Applying clay for heat treating
14:41 Heat treating by quenching in oil
15:21 Testing hardness with a file
15:30 Tempering to reduce brittleness
16:03 Finish grinding the blade
16:33 Straightening the blade
17:15 Preparing handle scales
18:41 Cutting steel pins
20:04 Gluing handle scales with epoxy
22:53 Polishing the blade
25:31 Hand polishing the blade
26:00 Etching the blade to bring out hamon
27:50 Sharpening with tri-stone system
29:03 Cutting tough vegetables

#blacksmithing #knifemaking #kitchenknife