RubberGrip Fitting Instruction
Автор: TrackGrip
Загружено: 2024-05-12
Просмотров: 5321
Описание:
1. Remove both bolts and separate grips into two pieces.
2. Place grips on either side of the track.
3. Tap lightly on each end with a rubber mallet if needed. Some skid steer models will require a packing plate on the underside lip for spacing. If the grip is too loose, add packer plate.
4. Align bolt holes. Once bolt holes are aligned, put bolts through and tighten using a wrench. Do NOT over tighten. Do NOT use impact tools to tighten bolts.
5. Repeat steps 1-4 for each grip, spacing them 1½ feet /450mm apart around each track. Spacing should be even.
Find out more at https://trackgrip.com/rubbergrip/
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
