ALL ABOUT YOUR Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount

Описание: Rockville:

https://www.rockvilleaudio.com/rcm02/

Amazon:

https://www.amazon.com/dp/B01EQXYUDO?...

eBay:

https://www.ebay.com/itm/392363517880...

AudioSavings:

Walmart:

Description:

The Rockville RCM02 condenser microphone performs better than famous branded microphones that cost over $125. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We highly recommend this design. We also upgraded this model to a high end metal anti wind cap! This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose

Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM02 amazing in studio applications.

The aluminum construction makes the RCM02 tough enough for Live sound applications as well!

Multiple connection options!

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!

The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value

After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.

What's Included:

RCM02 Condenser Microphone (made of aluminum!)
100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
10 foot 100% Copper XLR to XLR cable to connect to any mixer with phantom power
Metal Shock Mount
Metal Anti-wind Foam Cap
Owners Manual
Warranty Card
Features:

Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
Aluminum high quality construction
Polar Pattern: Internally Polarized Condenser Cardioid Design
Large diaphragm for smooth, natural sound and low noise
Power Requirements: 48V DC Phantom Power
Uni-directional
Sensitivity: -29dB±2dB (0dB=1V/Pa at1kHZ)
Output Impedance: 200O±30% (at 1kHz)
Standard Operating Voltage: 3V
Operating Voltage Range: 1.5V-10V
Current Consumption: Less than 500uA
Voltage Deduction Characteristic: Within 3dB at 2V
S/N Ratio: More than 24dB
Frequency Response: 30Hz - 20 KHz
Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
Load Impedance: Greater or = to 1000 Ohms
Equivalent Noise Level: Less than 18dB A (IEC581-5)
Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
Electrical Current: Greater than 4.8Ma
Microphone Body Net Weight: 380 Grams (0.84 Pounds)
Microphone Max.diameter: 51mm (2" inches)
Microphone Length: 215mm (8.46" inches)
Microphone Material: Steel grille + Aluminum (handheld part)
PCB Layout: Surface Mount