Bosch Classixx6 Washing Machine Drain Pump removal

Описание: How to remove, replace and clean the Drain Pump on Bosch Classixx6 when the drum stops spinning and no waste water is emptying. Where there is no spinning during washing and rinsing giving the Error with the 3 lights on front panel flashing (1200, 600 and Speed Perfect) - This can be reset by turning programmer to 6pm bottom position for 5 seconds (x5 flashes) then one more click to 7pm, press the Aqua Plus then turn back to 12 o'clock (top).
Tips and guide only - I am not a washing machine Engineer!
Recommend removing the Machine Drain Pump by removing the 2 screws holding the front lower plastic panel then removing the Drain Pump from under the machine. Clean both pump and hoses. Tilting the machine back to gain access can be risky so please place something heavy under the machine to keep it up.
The ball in the sump hose is a non-return valve that stops pumped out water syphoning back at the end of the pump waste out cycle.
This may apply to other models but check first.
For carbon motor brushes replacement see video link below:
   • Bosch Motor Brushes Classixx6 washing machine  
For Leak on floor from top front panel see video link below:
   • Bosch Leak on Floor Classixx6 washing machine