ISUZU brand 5 ton small tipper truck

Описание: ISUZU brand 5 ton small tipper truck can automatically tip over a certain angle for unloading through the loading compartment, which greatly saves unloading time and hydraulic pressure, transfers the transportation cycle, improves production efficiency, and reduces transportation costs. It is a commonly used transportation vehicle.

ISUZU brand 5 ton small tipper truck maintenance:
1. New dump trucks or trucks that have been overhauled must undergo trial operation to make the lifting process of the carriage smooth and without movement.
2. All parts should be replaced with lubricating oil correctly according to regulations during use, which greatly reduces the unloading time and labor. The lifting mechanism shall change the oil strictly on schedule.
3. Cancel the overload according to the standard of rated load.

ISUZU brand 5 ton small tipper truck operation process:
1. Don't suddenly push the lifting handle to the "down position" during the full-load lifting.
If this operation error occurs, the carriage suddenly rushes down, which will bring a great impact to the frame, or even an accident. Therefore, the above operations should be avoided as much as possible, and the operation must be carried out carefully if there are special circumstances, and the landing speed must be slowed down as much as possible, and the carriage must not be suddenly dropped to the bottom.
2. Don't use heavy lifting truck-heavy brake to unload.
Due to the high inertia force of the heavy lifting vehicle (usually 5-20 times the rated lifting force), it is very easy to cause permanent deformation of the frame, open welding of the carriage and auxiliary frame, burn the oil pump or damage the sealing ring, and damage the hydraulic cylinder , The height of the vehicle is reduced, and the serious one will cause a rollover accident. Therefore, dump trucks are generally prohibited from driving while lifting.
3. After the dump truck has finished unloading the cargo, the power take-off must be disengaged to drive the truck.
If this operation error occurs, when the dump truck is driving, because the power take-off is in the "engaged" position, the oil lift pump will run at high speed and continuously without load in the "small cycle" state. As a result, the temperature of the hydraulic oil rises quickly, which can easily cause damage to the oil pump oil seal, and even "burn out" of the oil pump; more serious is that the operation of the oil pump means that the hydraulic system has a power source, and the compartment is prone to automatic rise during driving. Accident.
4. The power take-off must not be in the "connected" position when driving.
If it is in the “on” state (the red light is on), the oil pump will continue to rotate, and the hydraulic system will have a power source. This will cause the car to automatically lift due to misoperation on the pneumatic control valve; Even if the control distribution valve is in the "down" position, oil must enter the oil pump, which will burn the oil pump.