PS3 Undervolting is a MUST!!! (Sherwood Syscon) + Power Consumption & Temps Test By:NSC

Описание: Hi Guys :)
Just for you to understand, normally the CELL runs with about 1.20-1.25 volts and the RSX with about 1.30-1.35 volts, it depends the PS3 Model, condition from the NecTokins, your multimeter and stuff like that.

Me and other people proved that the standard voltage is just to high and not really need because it causes extremly overheating problems and this is just unnecessary...

With other words, your PS3 is able to run also with lower voltage and also way cooler, this made my PS3 running about min. 10°C Cooler and the fan speed got lower too!

For that Mod. you will need to get connected to the PS3 Syscon, please watch this video first for more Info:
   • PS3 Syscon connection guide - YLOD Diagnos...  

For the syscon reader adapter Google:
UART FT232RL or PS3 UART FT232RL

New Syscon Reader package:
https://1drv.ms/u/c/beb708d783520133/...

How to prepare your Syscon reader:
   • PS3 Syscon Reader easy installation By:NSC  

Check this also if you have more questions:
https://www.reddit.com/r/PS3/comments... ( BIG THANKS TO: Vita_wetter)

Here you can download the ViD tables for Sherwood and Mullion Syscon:
https://1drv.ms/u/c/beb708d783520133/...

Command codes for Sherwood Syscon:
Read CELL: r 50 01
Read RSX : r 51 01

Write to CELL: w 50 [your value]
Write to RSX : w 51 [your value]

If you have the same model like in this Video, CECH-250x you can probably try my settings:
CELL 0.86250v [75]
RSX 0.84375v [78]
To be very sure without testing around just set both to 0.90000 volt [6F] Should work fine.

On the PS3 Slim CECH-200x models you can "try" to go directly to 0.9500v for the CELL and RSX [67]

On the "Super Slim" you can also "try" 0.9000v on both chips, should work without problems on every Super Slim! [6F]

All this voltages was tested on normal Firmwares (CFWs) "without overclock"

Don't forget to fix the checksum after every change, address on sherwood syscon is:
7fe Just do it like i show in the video.

w 7fe [fixed checksum]

PS3 Undervolting on Mullion Syscon:
   • PS3 Undervolting is a MUST!!! (Mullion Sys...  

Fixed an Extremely Overheating PS3 only by Undervolting:    • PS3 EXTREMELY OVERHEATING -fixed- only by ...  

Here you can also read more about:
https://www.psx-place.com/threads/ps3...

https://www.psx-place.com/threads/has...

This will blow your mind, i promise!

Finally this will save a lot PS3's now even more!

Undervolting plus IHS delid, is the best of the best you can do for your PS3!

PS3 Model in this Video:
PS3 Slim CECH-250X
Data Code: 0C

PS: DANKE AUCH AN DAS TEAM VON GAMEPRO FÜR DEN SEHR NETTEN BEITRAG:
https://www.gamepro.de/artikel/ps3-un...

THANKS TO ALL THAT ALWAYS TRUST IN MY WORK AND ALWAYS SUPPORTED ME, WITHOUT YOU ALL THIS WOULD NOT BE POSSIBLE!

THANK YOU SOOOOO MUCH!!!

Best Regards
NSC