How to replace the Rear Brakes 2006 - 2012 Ford Fusion 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/FUSION
Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Brake discs: https://carparts.solutions/RearBrakeD...

Brake pads: https://carparts.solutions/RearBrakeP...

Brake cleaner: https://carparts.solutions/BrakeCleaner

Copper grease

💪 TIGHTENING TORQUES
Brake caliper mount bolts: 52 Ft-lbs

Slide pin: 66 Ft-lbs

Disc holding bolt: 10 Ft-lbs

Wheel lug nuts 2006 through 2010 models : 98 Ft-lbs

Wheel lug nuts 2011 through 2012 models : 100 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Ford Fusion: https://carparts.solutions/ToolBox

List of the tools we used to replace the Rear Brakes on a Ford Fusion:
Hydraulic jack: https://carparts.solutions/FloorJack
Jack stands: https://carparts.solutions/JackStands
13 mm wrench
14 mm wrench
17 mm wrench
Brake wind-back Tool: https://carparts.solutions/BrakePisto...
Crowbar
Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWren... 100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...
Ratchet
Flat head screwdriver
13 mm socket
Torx T40 socket
Lineman's pliers
Hammer
Wire brush
Cloth
Paper towels
Pin punch

Don't forget to subscribe:    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your 2006 - 2012 Fusion safely? ⬆ 🚗 :    • How to jack your 2006 - 2012 Ford Fusion s...  

How to replace the Rear Brake Calipers 2006 - 2012 Ford Fusion 🚗 :

How to replace front brakes, rotors and pads (Complete guide) 🚘 :    • How to replace front brakes, rotors and pa...  

⚠️ CARPARTS.COM'S INFOS
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective."

For this operation, it is essential to have a brake calliper windback tool, which is a specific tool that allows you to press the piston into the caliper but also to make it turn on itself to reset the slack adjuster of your handbrake.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro + how to jack your Fusion
0:20 Remove the brake caliper
1:43 Remove the pads
1:53 Remove the anti-rattle clips
2:07 Remove the caliper mount
2:24 Remove the rotor + clean the wheel hub
2:47 Put the caliper mount back + tightening torque
3:51 Prepare and insert the new pads
4:36 Put the caliper back + tightening torque
5:38 Safety tips + put your Fusion back on the ground
7:02 Tips