The Hinges on this Flip Top Lid are Ingenious!

Описание: In this video I show you how I make this flip top lid for a wheel thrown container. The hinge pins are fired in the clay...so there is no assembly after firing. I make, trim and glaze, showing you how to handle the lid throughout the project. I discuss the use of kanthal wire for this project.

This is another original idea from Tufts Studio! #originalidea #originalideas

The YELLOW RIB featured in nearly every video has been with me for years and I use it for shaping, refining & compressing. I would never want to be without. It's hard to loose... and it just carries on. Along with my wheel - this is with me for the long haul! I would strongly recommend it here:
https://amzn.to/4amaYIX (Yellow out of stock. This is the green one).

If you find this video useful and you would like to support our channel, you can BUY ME A COFFEE at
https://hbgo.au/BuyMeACoffeeTuftsStudio

#fliplid #fliptop #fliptoplid #flip-lidpottery #fliplidpottery

Disclaimer. As an Amazon Associate I earn a small commission from qualifying purchases. This does not cost you any more when you purchase using my links. Thank you for your support.
__________________________________
Making a dinner set playlist is here:
https://hbgo.au/MakingADinnerSet

Binge all our videos here:
https://hbgo.au/AllTuftsStudioVideos

You can find out about my work at my website
https://www.tufts.com.au

or instagram
  / itufts  
__________________________________
00:00 Intro
00:15 Let's get started with the lid
00:53 Forming the undercut
01:31 Throwing the base
02:26 Forming the walls
03:14 Trimming time
04:32 Marking the lid for cutting
05:38 Inserting the pins
07:05 Special glazing technique for the lid
07:42 Glazing the base
08:12 Glaze fire
09:09 Flip-Lid