Smart Way To Manually Bend The Metal Pipes Of Greenhouse Frame !
Автор: Wisdom Pouchannel
Загружено: 2024-08-22
Просмотров: 61299
Описание:
Here Are Some Simpler Methods For Manually Bending The Metal Pipes Of The Greenhouse Frame :
1. Use A Template
First make a wooden or metal template of the required bending shape, and then bend the metal pipe along the edge of the template !
2. With The Help Of Ropes Or Chains
Fix one end of the metal pipe, tie ropes or chains at the part to be bent, and then achieve bending by pulling the ropes or chains !
3. Use The Lever Principle
Find a sturdy stick as a lever, place the metal pipe on the appropriate fulcrum, and bend the metal pipe by pressing down the never !
4. Fill With Sand
Fill the metal pipe with dry sand and plug both ends tightly. This can increase the strength of the metal pipe and prevent it from collapsing or deforming during bending, and then perform the bending operation !
5. Multiple Small-Angle Bends
For metal pipes that are difficult to bend in place at one time, you can make small-angle bends multiple times to gradually reach the required angle !
These methods are relatively simple. You can choose the appropriate way according to the actual conditions and needs !
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
