Pulling the oil pan and marking the rods
Автор: Candyshop Customs
Загружено: 2023-04-19
Просмотров: 1834
Описание:
So now that we can access the pan we've gotta remove it. This oil pan is sealed with silicone and has a windage tray as well. To separate the pan from the block I use a gasket scraper and drive it between the pan rail and the block and do my best to gently separate the silicone from the block and pan.
This will bend the pan rail which is no big deal, we'll just have to "Correctively adjust" it before it goes back on 😉
Once the pan is off we mark the Rods and caps for location and directionality. Back in the day this was done my using number stamps and a swing press (hammer) now days that is NOT acceptable. So I'll instead degrease the rod and cap and use a permanent marker or a paint pen.
Now we can detorque the caps and prepare for removing the rods and pistons.
#oilconsumption #burningoil #rering #shoptips #mazdab2200 #b2200 #minitruck #minitruckin #MinisOnDaRise #minitruckinaintdead #headgasket #kiafe3 #kiafe3swap #shoptip #shoptrick #carknowledge #mechanic #mechanictips #shorts #short
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
