sensor correction debug

Описание: Problem: Correction roller frame wobbles, material cannot be identified

There is a hidden button at the SET position of the sensor probe, we press and hold it for 3 seconds and the red light blinks. Now observe the display is 0% this data is right.
1. If the data is not in the 0% position, you need to adjust, first long press the set button for 3 seconds, turn off the sensor, restart. 2.

2. if reboot can not solve the problem, we use a screwdriver to debug. First of all, the screen shows manual mode. We long press 3 seconds, the red light flashes, we pry open the package to see 100 figures below a very small screw, we use a screwdriver for debugging, if the number of display is greater than 0, the probe sensitivity is too high, we will be counterclockwise debugging will reduce the value of the side of the debugging side of the attention of the display value is just to 0%, and then we then long press SET for 3 seconds, to the red light extinguished, you will see that the controller Numerical display is normal.
Note: the use of screws when debugging to be a little lighter, the force will be too large to damage the product.
For more information about guiding tension control, please contact us at
Subscribe to our newsletter and contact us
[email protected]; Mobile/wechat/whatsapp: +86 17821747580

A web guide sensor is a crucial component of web guiding systems used in industries dealing with continuous materials like paper, film, or textiles. Its primary function is to detect and monitor the position of the material, known as the “web,” as it moves through various stages of the production process.

These sensors come in various forms, including ultrasonic sensors, photoelectric sensors, or edge sensors, depending on the specific application requirements. They are typically installed inline within the machinery handling the material and are strategically positioned to detect deviations in the web’s position relative to a predetermined path or reference point.

Web guide sensors provide real-time feedback to a web guide controller, which analyzes the data and issues commands to actuators to make necessary adjustments to guiding elements such as rollers, guides, or edge sensors. This continuous monitoring and adjustment ensure that the web remains aligned and centered throughout the production process.