How to Eye Splice Dyneema (Simple Method)

Описание: In this video, you will learn the basic method of splicing an eye into Dyneema. To prevent the eye splice from slipping when unloaded, it will be locked in place by incorporating some seizing with whipping twine.
I would highly recommend that if you are going to use Dyneema for critical loads, pop over to ‪@HowNOT2‬ where they test Dyneema splices and knots to destruction. This way you will have better knowledge of how safe and secure your Dyneema project is.
#sailing #letsgetknotting #survivalknots

0:00 - Introduction to Dyneema Eye Splice
0:34 - Why Use Dyneema for Splicing?
1:02 - Important Safety Considerations for Dyneema
1:30 - Step 1: Measuring Dyneema for the Eye Splice
2:33 - Determining the Eye Size for Your Splice
3:00 - Marking the Dyneema for Splicing
3:30 - Preparing the Dyneema End for Tapering
4:15 - Tapering the Dyneema Strands for a Neat Splice
6:41 - Inserting the Fid into the Dyneema
7:52 - Pulling the Tapered End Through the Dyneema Core
9:43 - Dressing and Smoothing the Eye Splice
10:44 - Cutting Excess Dyneema Strands
11:09 - The Completed Dyneema Eye Splice
11:36 - Why Seizing is Recommended for Dyneema Eye Splices
12:21 - Preparing Whipping Twine and Needle for Seizing
13:21 - Threading the Needle for Seizing
13:51 - Starting the Seizing with a Clove Hitch
15:08 - Wrapping the Whipping Twine for Seizing
16:23 - Passing the Needle Through the Dyneema Core
17:48 - Creating Tram Lines for Secure Seizing
19:14 - Locking Off the Seizing with a Knot
20:30 - Finalising the Seizing and Cutting the Excess Twine
21:07 - The Completed and Secured Dyneema Eye Splice
21:29 - Optional: Adding Glue for Extra Security