SYNC DAW TO PORTASTUDIO - PART 1.5: USE FREE SOFTWARE FOR MIDI SYNC SIGNAL INSTEAD OF HARDWARE

Описание: THIS IS AN UPDATE TO SYNC DAW TO PORTASTUDIO (TURN A 4 TRACK PORTASTUDIO INTO A "24 TRACK" OR INFINITE TRACK):
If you don't have access to a MIDI SMPTE/LTC Generator/Decoder, but have an interface and a few cables, you can use FREE software that does the same exact thing. This will save you money and headaches finding drivers or support for older devices.

INFINITE PORTASTUDIO TRACKS Part 1:    • SYNC DAW TO PORTASTUDIO (TURN A 4 TRACK PO...  

Thank you for watching! Please like and subscribe if this helped! Comment with any questions and I will try to help.

I also have a Patreon if you wish to support my content! Please consider if this tutorial or any of my other videos helped:   / pseudoretro  

You will need the following:
MacOS Computer
-PortaStudio/Multi-track recorder with SYNC feature.
TimeCodeClock: (https://help.millumin.com/?page=22_la...)
LockStep: (https://figure53.github.io/studio/)
An audio Interface with 4 or more inputs, 8 or more inputs if you're using an 8 track. I am using a Focusrite Scarlett 18i20 in this video. (https://www.sweetwater.com/c695--Focu...)
A DAW that can slave to MTC. Not all DAWs can do this. Make sure you are using one that can. I am using Logic Pro X in this video.

VHS Cameras Used in this video:
Panasonic OmniMovie AFX8
JVC VideoMovie GRC7U

Royalty Free Songs Used:
Le Gang - Magic (  / m...​  )
Autumn 2011 - Lox-beats (https://www.youtube.com/watch?v=r4twe...)

There are many Budget friendly interfaces at the following link! (4 Inputs: https://www.sweetwater.com/c695--USB_...)

(8 Inputs: https://www.sweetwater.com/c695--USB_...)



FAQ:

Q: Can I sync 2 Portastudios this way?
A: No. PortaStudios can't read MTC/SMPTE signals, it can only record and play it back.

Q: Can I make my DAW the Master and the PortaStudio the Slave device?
A: No. Again, PortaStudios can't read MTC.

Q: What is the point of this if it goes against traditional bouncing and committed mixing?
A: Imagine a 24 track PortaStudio. Wouldn't that be amazing? Bouncing multiple times degrades quality by a lot. Being able to keep the initial quality of your recording will allow for better mixing as well. Also, no more worries about stereo!

Q: Can I use a JLC PPS-2, MOTU Timepiece, Tascam MTS30, etc?
A: Yes, this is possible. More MIDI I/O only devices, you would probably use a MIDI to USB cable. MOTU Timepieces on the other hand are risky as most on reverb and eBay use very outdated ports. Try this at your own risk.

Q: Do I need to turn on the sync switch on my device?
A: The sync switch automatically turns on DBX which I do not like so I leave it off. If you enjoy DBX, you can switch it to sync. '

Q: Will this work on MiniStudios?
A: No. There are no direct outs on these models.

Q: Can I control the DAWs tempo using the pitch wheel?
A: No. This will mess up the synchronization between the PortaStudio and DAW.