How To Install And Bleed Hydraulik Disc Brakes — Trek x Magura Mt05 Upgrade

Описание: Main Video Description:

I’m upgrading this bike step by step, including
a detailed brake change, bleeding of the brakes
and component work.
I’ve added small caption points and clearly marked
sections for every stage of the process, with
extra info bits throughout the video.

You can skip to any part that interests you and
follow each work step in detail.

If you’re into bike builds, repairs, or upgrades
— enjoy the project! —




00:00 Intro
00:11 Build Details
00:30 Internal Cable Routing Thoughts
00:55 Parts & Magura — Talkthrough + Cat
01:31 Start — Rear Brake Disassembly
01:56 Rear Brake Disassembly — Old Olive + Small Parts + Cat
02:49 Thoughts — Pull Direction Old Hose
03:43 Rear Brake Disassembly — Lever Fitting
04:16 Rear Brake Disassembly — Rear Hose Fitting Off
04:35 Thoughts — Mechanic Hack
04:55 Rear Brake Disassembly — Rear Hose Fitting Off
05:08 Rear Brake Disassembly — Fitting Washers
05:28 Rear Brake Disassembly — Remove Hose from Lever
05:54 Cut Rear Hose — Remove Old Hardware
06:26 Check Rear Hose Length
07:02 Thoughts — Mounting Solution for Rear Brake Hose
07:45 Solution — Connect & Remove Rear Brake Hose
08:27 Mount — Old SRAM Olive Secured with Wire
09:03 Pull Old Brake Hose Through Frame
09:14 Secure the Lifeline
09:39 Workshop
10:12 Organizing the Workspace
10:39 Rear Brake Disassembly — Remove Hose from Rear Triangle
10:49 Rear Brake Assembly — Fit Hose Through Rear Triangle
11:30 Clean — Damper Bushings & Mount Place
12:11 Clean — Floor + Cat
12:45 Rear Brake Assembly — Mount Hose to Caliper & Align
14:59 Lifeline Fail
15:28 Rear Brake Assembly — Fit Hose Through Frame
16:05 Thoughts — Lifeline Wisdom
16:26 Workshop
16:47 Rear Brake Assembly — Cable Management
17:28 Rear Brake Assembly — Insert Frame Piece to Stop Rattle + Cat
19:55 Cat
20:15 Rear Brake Assembly — Cut the Zip Tie
20:29 Frame Inserts
22:23 Rear Brake Assembly — Check Brake Hose Alignment
22:57 Thoughts — Rear Brake Assembly — Important Point Mentioned
23:40 Rear Brake Assembly — Mount the Rear Lever
25:23 Rear Brake Assembly — Cut Brake Hose to Proper Length
26:22 Thoughts — Workshop Wisdom on Hose Length
26:43 Rear Brake Assembly — Insert End Cap into Hose
28:33 Rear Brake Assembly — Insert Olive & Hose Into Lever
29:17 Rear Brake Assembly — Mount Brake Hardware & Lever
31:28 Bleeding — Hardware Prep
36:37 Fix the Handlebar in Place
38:34 Bleeding — Mounting Top Bleed Cup
41:24 Bleeding — Removing Brake Pads
42:18 Start Bleeding — Front Brake
46:04 Bleeding — Top Cap Front Brake
46:47 Tool Cleaning
47:26 Bit — for Recycling Friends + Cat
47:57 Test Fit Front Wheel
49:33 Front Brake Assembly — Align Front Brake
50:46 Front Brake Assembly — Create Bite Point
51:43 Rear Brake Assembly — Install Rear Wheel & Pads
54:03 Rear Brake Assembly — Align Rear Brake & Bite Point
54:44 Mounting the Rear Shock
57:32 Finished Bike + Rear Hub Sound
57:52 Outro
58:28 End