CosmoGlo XL Assembly Tutorial
Автор: CosmoGlo Light
Загружено: 2023-03-14
Просмотров: 5034
Описание:
It's time to assemble your new favorite light! CosmoGlo is a sturdy, large piece of furniture — we recommend giving yourself plenty of time to assemble. Try different height adjustments, base positions, and halo angles to find the right position to suit your services/space.
CosmoGlo XL is customizable in height and brightness, gives shadowless lighting coverage with our rotatable halo, and the new tri-tone LEDs offer a spectrum of dimmable lighting tones! With an additional 12 inches in height, the XL was designed with standing services in mind, includes an improved height adjustment clamp, and a larger flat base for increased stability!
To read our written instructions, visit www.thecosmoglo.com/pages/assembly
Always use caution when assembling and during use.
You may reach customer support at [email protected] or by DM on Instagram @thecosmoglolight
Timestamps/Chapters
00:00 - Welcome to CosmoGlo and Written Instructions
00:08 - Parts Included, Tools Needed for Assembly
PART 1
00:27 - Attach Halo to Poles
00:27 - Step 1: Loosen Clamp
00:33 - Step 2: Separate Poles and Straighten Cords
00:49 - Step 3: Feed Cord through Poles
00:54 - Step 4: Attach Poles to Halo
01:03 - Step 5: Secure Connections
01:16 - Step 6: Complete Poleset
01:23 - Step 7: Secure Clamp
PART 2
01:43 - Attach Assembled Halo and Poles to Base
01:43 - Step 1: Retract Excess Cording into Poles, Thread Cord Through Base
01:59 - Step 2: Stand Light Upright with a Friend and Align Holes
02:17 - Step 3: Secure Assembled Poles/Halo to Base
02:27 - Step 4: Connect Powerbox to Light Cord
USING YOUR LIGHT
02:34 - XL Dimmer Instructions
02:45 - Tips and Tricks for Use
02:54 - Protecting your Cords
03:00 - How to use Phone Clip
03:50 - Adjusting the LED Shield
04:03 - Positioning for Use
04:08 - Cleaning and Care
04:27 - Support and Patent Information
TURN KNOB STYLE CLAMP:
To loosen or tighten to adjust your light's height, you will turn the simple knob above the connector screw until it is sufficiently tight or loose to adjust the poles. You may tighten the connecter screw where the clamp meets the outermost pole with a phillips head screwdriver by turning right. (Clamp models vary - please reach out to support if you have questions about your clamp!)
FERRITE CLIP:
The black plastic piece on your cord is a ferrite clip. It remains inside poles and above your baseplate once fully assembled. This clip keeps cords stable inside the light while in use.
CORDS:
Avoid pulling on cords and allow room for them to move freely during adjustments. Do not apply unnecessary force/tension to any part of the light at any time. Do not apply pressure or step on the base plate when building, adjusting, or moving the CosmoGlo. Avoid turning your halo in one direction repeatedly - to balance it out, turn it in the opposite direction as well. Turning the halo in one direction only may cause wire damage over time.
POWER ADAPTER + CORD:
Be firm when linking connections - light may not turn on if not fully connected! Connect the small end of the light cord to your Power adapter. Connect power adapter into wall outlet. A small light should be visible when in use. (Powerbox models vary - please reach out to support if you have questions about your powerbox!)
USING YOUR LIGHT:
Once built and positioned, see the assembly video for additional steps to stabilize light for daily use in your space, and instructions for using the phone clip.
XL DIMMER INSTRUCTIONS:
Gently press dimmer knob with a long hold to turn light on and off. Short press the dimmer to toggle between light colors/tones. Turn the dimmer knob when powered on to adjust brightness as needed.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: