SOUR SERVICE & NACE MR MR0175 / ISO 15156 in H2S environment, WHAT is PREN?

Описание: Sour Service Requirements - H2S-containing environments in Oil and Gas production.
PREN - Pitting-Resistance Equivalent Number
WHAT IS F PREN?
Why is NACE MR0175 / ISO 15156 is SO Important in Oil & Gas?

Brief Scope: NACE MR 0175/ ISO 15156:
1. It describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments.
2. As a supplement, It can be applied to help to avoid costly corrosion damage to the equipment itself.
3. ANSI/NACE MR0175/ISO 15156 addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking, and galvanically induced hydrogen stress cracking.

10 Key Points of MR0175 / ISO 151561.
1. Purpose: Defines requirements for metallic materials in H₂S-containing (sour) oil & gas environments to prevent cracking and corrosion failures.
2. Failure Mechanisms: Controlled Protects against Sulfide Stress Cracking (SSC), Hydrogen-Induced Cracking (HIC), Stress Corrosion Cracking (SCC), and other hydrogen-related failures.
3. Applicable Materials: Covers carbon steels, low-alloy steels, martensitic stainless steels, duplex & super duplex steels, austenitic stainless steels, and nickel-based alloys.
4. Hardness Limits: Specifies maximum allowable hardness (e.g., ≤22 HRC for many carbon/low-alloy steels) to reduce SSC susceptibility.
5. Environmental Limits: Sets permissible ranges for H₂S partial pressure, pH, temperature, and chloride content where materials can be safely used.
6. Material Qualification: Materials must be qualified through testing or proven field service experience for sour environments before use.
7. Heat Treatment Requirements: Defines mandatory heat treatment conditions (e.g., PWHT, quenching & tempering) to achieve safe hardness and microstructure.
8. Three-Part Structure (ISO 15156)
Part 1: General principles
Part 2: Carbon & low-alloy steels
Part 3: Stainless steels & nickel alloys
9. Mandatory for Sour Service Projects: Oil & gas companies, EPC contractors, and regulators often require compliance with MR0175/ISO 15156 for design approval.
10. Global Recognition: Known as NACE MR0175 (historic) and ISO 15156 (current). Both refer to the same standard, widely accepted in oil & gas worldwide.

PREN: Pitting-Resistance Equivalent Number- FPREN
Higher values of FPREN provide higher corrosion resistance
FPREN number developed to reflect and predict the pitting resistance of a CRA based upon the proportions of the elements Cr, Mo, W, and N in the chemical composition of the alloy.


If You're Reading This, Leave A Like, Comment And Subscribe!

▂ ▃ ▄ ▅ ▆ ▇ ▇ ▇ ▇ Open Me ▇ ▇ ▇ ▇ ▆ ▅ ▄ ▃ ▂

Description: This Channel always discusses the Quality, inspection and construction perspective of construction of pipelines and similar topics. Time to time we discuss the related basic knowledge, physics or science to help understanding the mani topics in details.


▬▬▬▬▬▬▬▬▬▬▬▬ FAQ ▬▬▬▬▬▬▬▬▬▬▬▬

Q. Who am I ?

Ans : I am a pipeliner in Saudi Arabia (Gulf) who has been working with oil and gas field for the past 21 years.

Q. What's my specialty?

Ans : I head the quality control department of an MNC in oil and gas control for the past 12 years.

Q. Why am I making videos about Oil and Pipeline?

Ans: To teach the basics about Oil and Pipeline, Job Opportunities , Placement in Gulf countries , Inspections and Interview procedures and more !! this channel is for people who are in need for some experienced voice.

▬▬▬▬▬▬▬▬▬▬▬ Other Videos ▬▬▬▬▬▬▬▬▬▬


1. Do You know how to construct Pipeline, Pipeline Construction Process Flow, How to Construct pipeline

2. How to prepare a WPS? HOW TO PREPARE A WELDING PROCEDURE (WPS) Part 1 to 7-

3. DESTRUCTIVE MECHANICAL TESTS FOR WELDS TENSILE HARDNESS BEND IMPACT FRACTURE MACROETCHING CTOD WELDS

4. UNDERWATER WELDING & INSPECTION

5. PROCUREMENT QUALITY ASSURANCE AND CONTROL IN PROCUREMENT -

6. CALIBRATION of PRESSURE GAUGES AND RELIEF VALVES, DO YOU KNOW IN HOUSE CALIBRATION, CALIBRATION LAB

7. CATHODIC PROTECTION FOR PIPELINES, CP, ICCP, SACRIFICIAL ANODES, CORROSION PROTECTION OF PIPELINES

8. SELECTION OF VALVES, DO YOU KNOW BASIC PROPERTIES OF A VALVE?, WHICH VALVE TO BE USED FOR ISOLATION?

9. Do you know where are you going to work in Oil & Gas Field Construction? Familiar Code definitions.

10. Welding, welded Joints Type Design know how, Basic Processes, Advantage Disadvantage Applicatrion

11. Opportunities in Gulf Saudi Arab types of Job culture Salary OIl & gas field network terminology

12. Oil and Gas field exploration process flow know how

13. INTERESTING FACTS FOR FLANGES & FLANGE FACES?

▬▬▬▬▬▬▬▬ Thanks for watching ▬▬▬▬▬▬▬▬▬▬