Steam sterilizers: Filling and emptying the water tanks | Vacuklav Evolution Tutorial

Описание: Chapter 7: Filling and emptying of water tanks of the stand-alone autoclaves / steam sterilizers:


The Premium Class Evolution consists of stand-alone and fixed water units - depending on the installation conditions in your decontamination room. Vacuklav 41 B+ and 43 B+ Evolution are stand-alone autoclaves provided with integrated water tanks. They can therefore be operated without connection to a water supply. Learn how to fill and empty the storage tanks in the Premium Class Evolution tutorial.

Please fill the storage tank by removing the lid and filling the tank up to the marked area with a maximum of 4 litres of demineralized water.
The feed and waste water tanks are emptied as follows:
1. Open the media board.
2. Push the supplied drain hose onto the connector until it locks into place.
3. Open the pipe with a ¼ turn and drain the water into a bucket.
4. Turn the knob to the vertical position to close the drain cock.

To clean the internal storage tanks you can completely remove the top cover of the autoclave. The right storage tank can be cleaned each time it is filled with feed water, if necessary. The left waste water tank must be cleaned every two weeks.

Get more information about operating an autoclave on our website: https://www.melag.com/en/products/ste...

#Autoclave #Demineralizedwater #Standalone