3D printed RC Snowcat | The Electronics

Описание: Trying to use the snow for something fun. I decided to build myself a snowcat. In this video I show you how i connected the motors, speedcontrollers and the reciever.

The STL files for the tracks can be found here:
https://www.thingiverse.com/thing:586...

The files for the rest will be available later

Here are some links to the hardware I have used. they are afiliate links. Which means that if a lot of you order a lot from these links, I might get a few bucks. It dos NOT cost you anything more :-)
---------------------------------------------------------------------------------------------------------------------
My go-to speedcontroller Hobbywing 1060 You need 2pcs: https://s.click.aliexpress.com/e/_AFFrOp

Motor.160rpm 12V:
https://s.click.aliexpress.com/e/_DBH...

Motor coupling 8mm:
https://s.click.aliexpress.com/e/_DkZ...

Bearings. 5x11x4:
https://s.click.aliexpress.com/e/_Dmf...

M5 bolts. 60mm
https://s.click.aliexpress.com/e/_DmO...

M3 and M4 Bolts:
https://s.click.aliexpress.com/e/_Dmb...
or
https://s.click.aliexpress.com/e/_DmO...

M3 Nylock
https://s.click.aliexpress.com/e/_DCe...

M2 Bolts
https://s.click.aliexpress.com/e/_Dd5...



-----------------------------------------------------------------------------------------------------------------------

If you want to se how to use Autodesk Fusion 360 for your rc parts needs, take a look at this playlist on how to make Fusion 360 easy:

   • RC parts and equipment in Fusion 360  

Make sure to subscribe to my channel so you don't miss out on any content.
It's free for you, but means a whole lot to me.
https://www.youtube.com/c/YetAnotherR...


#3dprintedrc #freeSTL #snowcat

*************************************************

Shot on:
Sony ZV-E10


*************************************************
[email protected]