1984 C4 Corvette front suspension rebuild (Superpro Bushings, ball joints, hubs and steering rack)

Описание: I detail how I went through rebuilding the front suspension on my 1984 corvette. Hope it helps someone.

Superpro website where you can get the diagrams used in the video: https://www.superpro.com.au/find/supe...

Chapters:

Introduction: 0:00-1:16
Getting the sway-bar out of the way: 1:17-2:35
Removing inner fender access panel: 2:36-4:46
Outer tie rod end removal from knuckle: 4:47-7:52
Caliper and rotor removal: 7:53-9:24
Upper and lower ball joint removal from knuckle: 9:25-12:27
Removing the hub/knuckle assembly from the car: 12:28-13:01
Lower control arm spring cover removal: 13:02-15:13
Upper control arm removal: 15:14-19:17
Lower control arm removal: 19:18-22:55
Removal of wheel bearing from hub: 22:56-24:38
Power steering rack removal: 24:39-36:43
Power steering rack centering and examination of new part: 36:44-39:59
Outer tie-rod installation: 40:00-41:47
Power steering line replacement: 41:48-49:30
Installation of the new rack and pinion: 49:31-1:00:23
Lower control arm ball joint and bushing removal and installation: 1:00:24-1:04:41
Upper control arm ball joint and bushing removal and installation: 1:04:42-1:14:15
Lower control arm installation: 1:14:16-1:16:22
Upper control arm installation: 1:16:23-1:18:37
Lower spring cover installation: 1:18:38-1:20:06
Knuckle installation to upper and lower ball joint: 1:20:07-1:23:23
Sway bar end-link bolts and hub installation: 1:23:24-1:24:36
Brake caliper installation: 1:24:37-1:24:59
Tie-rod end and upper control arm access panel: 1:25:00-1:25:28
Greasing: 1:25:29-1:26:02