D.I.Y. - How to Upgrade Car HVAC with LED Lights

Описание: In this video I show you how to install LEDs into your car's climate control unit. In this video I show you specifically on an SN95, 1997 Ford Mustang Cobra.
I start by removing two 7/64 bit screws. I then move the shifter cover out of the way and remove the cigarette lighter plug. Next I remove the radio with a standard wedge screwdriver. Once the radio is out of the way, there is another screw way in the back behind the radio; on some Mustangs there are two screws. Once the screw is out, the center cover can be removed, you may need to lightly pry it out. Mu Mustang had the factory disc changer so I removed that as well. Now that the cover is out of the way, there are four screws holding the HVAC in place. You can use the 7/64 bit to remove them. Carfully pull out the climate control and twist the two black knobs on the back side. Swap out the lights with the new LEDs and put it back it. Before putting every thing back together turn the car on and turn the lights on to make sure the new LEDs are working. If they don't come on, just take out the light and rotate them 180 degrees.

Previous Video LED Dash Upgrade -    • D.I.Y. - How to Install LED Dash Upgrade |...  

Yorkim Blue T10 LED - https://www.amazon.com/gp/product/B01...

http://m.harborfreight.com/pack-of-3-...