Jumbo 90 Briquetting Plant Briquetting Machine Briquetting Press 90 dia Briquette Machine

Описание: For Details , contact us at 8510993333, 011 - 25195251
Email - [email protected] , [email protected]

The process of 'Briquetting' is the physical transformation of the loose raw material into a compactly compressed unit. The form change results in a much higher specific density of the material which increases its combustion efficiency as compared to the loose material.

HI-TECH AGRO PROJECTS PVT.LTD. Pioneers in the field, by setting up and successfully running the first briquetting plant in the country, have now perfected the technology and machinery to suit the various biomass materials available in the country.

MANUFACTURING PROCESS
 Waste materials are tested for their chemical composition to decide on their suitability and to select a proper mix.
 Sun dried materials containing approximately 10-15 % moisture is suitable for briquetting. However if material has higher moisture content it needs to be dried before use.
 Material is screened chopped and ground to get the desired size and bulk density and is pneumatically transported into storage bins. This helps in separation of the heavier & match lock particles and also unifying the moisture content in the material. Air used is hot or wet as the case may be, for control of moisture.

Material from bin is discharges to the machine through regulated conveyors where it is
compressed in specially designed dies. The compression raises the temperature of the
material, softening some of the inherent binders in it, which come to the surface and bind the material together.
 Cooled briquettes are cut and packed in bags or stored in build for shipment or use.
 No binder is required in the process.