How to replace the Front Brakes 2013-2018 Nissan Altima 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/ALTIMA
Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Brake Discs : https://carparts.solutions/FrontBrake...

Brake pads : https://carparts.solutions/FrontBrake...

Brake cleaner : https://carparts.solutions/BrakeCleaner

Copper grease

💪 TIGHTENING TORQUES
Brake caliper mount bolts : 91 Ft-lbs

Slide pins : 20 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Nissan Altima :
https://carparts.solutions/ToolBox

List of the tools we used to replace the front discs and pads on a Nissan Altima :
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Phillips screwdriver
Big flat head screwdriver
Ratchet
14mm socket
19mm wrench
Clamp or iron wire
Flat head screwdriver
Flat head screwdriver
22mm socket
Hammer
Wire brush
Paper towel
Torque wrench :
20 to 250 Ft-lbs https://carparts.solutions/TorqueWren...
100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your Nissan Altima :    • How to jack your Nissan Altima safely ? ⬆ 🚗  

How to replace front brakes, rotors and pads (Complete guide) 🚘 :    • How to replace front brakes, rotors and pa...  

⚠️ CARPARTS.COM'S INFOS
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

When replacing brake discs, you also need to replace the brake pads. This is a mandatory procedure.

Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 How to pull up your Altima
1:03 Remove the brake caliper
2:02 Remove the pads
2:18 Remove the anti-rattle clips
2:42 Remove the caliper mount
3:03 Remove the disc + clean the Wheel hub
3:17 Prepare the new rotor
3:40 Put the new rotor back + Clean the caliper mount
4:03 Put the caliper mount back + Tightening torque
4:37 Prepare the installation of the new pads
4:50 Insert the new brake pads
5:16 Check the slide pins
5:32 Put the caliper back + Tightening torque
6:23 Safety tips
6:34 Put your Altima back on the ground
6:44 Tips