Rear Diff Fluid Change - Stuck Plug?!?!
Автор: Tyler Dillehay
Загружено: 2024-11-01
Просмотров: 1043
Описание:
More Rust = More Problems
This video applies to all 3rd gen 4runners 1996-2002
At the end of the day, I was able to get the fill plug removed so all is well. If you don't have any issues getting the fill and drain plugs removed, this job will only take about 20 minutes.
Required Tools: (if you're lucky)
24mm 6 point socket (could also use a 15/16")
18" breaker bar
floor jack
torque wrench
Optional (but probably required) Tools:
PB Blaster (or some other penetrant)
vise grips
bolt extractor set
drill and drill bits
hammer
Parts:
Crush Washers (part number 12157-10010)
Gear Oil
*Factory Service Manual Recommends 80W-90 (I used 75W-90)
*2WD - 2.91qts
*4WD (no e-locker) - 2.59qts
*4WD (w/ e-locker) - 2.91qts
Optional Parts:
Replacement Drain Plug (part number 90341-18057)
Replacement Fill Plug (part number 90341-A0002
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
