How to change and bleed brake fluid Suzuki GSXR motorcycle

Описание: How to change and bleed brake fluid Suzuki GSXR motorcycle. The front and rear brakes are not that hard to flush out and bleed. The air bleeder I use for the front is helpful but not needed. Once you are done bleeding the brakes, it is a good idea to bleed the master cylinder as there may be a small amount of contaminates in it.

The procedure for bleeding the master cylinder is as follows:

Time stamp 7:19 shows the bleeder for the master cylinder.

Procedure:
Obviously make sure you protect your paint from brake fluid by having rags handy and you can attach a hose to the valve.

1. Closing all the brake caliper bleed valves
2. Top up master cylinder
3. put cap on (it might squirt when you squeeze lever)
4. Squeeze lever
5. Open bleeder valve while you hold lever
5. Close bleeder valve, and then release lever
6. Repeat until you get a firm lever that does not feel spongy

If you have any questions or comments please let me know as I answer all questions.

Link for Tool on Amazon is:
https://amzn.to/31YdFzn

As an Amazon affiliate I earn on a small commission on qualifying purchases, this does not affect your price at all :)

Thanks
#garageking