Using e-bike controller on Ryobi lawnmower
Автор: IFixThings
Загружено: 2023-06-25
Просмотров: 8885
Описание:
The motor controller failed on this Ryobi mower.
I replaced it with an e-bike controller.
I bought it on Amazon 1000 watts for about $34.
The wires needed:
Blue
Yellow
Green
These go to the electric motor
Red
Black
These are for you 40v from battery
Small red (this is for your start switch), this needs to be at 40v to turn on controller
Red
Green
Black
Throttle control
Red is +5v
Black is gnd
Green is sense
If you connect red to green it will send 5v to controller but it will over rev motor and turn off
For mine, I needed around 1.5 to 2.5 v , so I used a 10k pot.
To get this to work, I had to start out with 0 v, then turn pot to desired rpm. 2700 for normal, and 3100 for high.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
