How to make a plazo cutting and stitching easy/কলি সহ প্লাজু কাটিং ও সেলাই

Описание: How to make a plazo cutting and stitching easy/কলি সহ প্লাজু কাটিং ও সেলাই
#easy #fashion #plazzo

Cutting and stitching a simple plazo (also known as palazzo pants) can be a fun and relatively easy sewing project, especially if you have some basic sewing skills. Here's a step-by-step guide to help you create a pair of palazzo pants:

Materials You'll Need:

Fabric of your choice (cotton, linen, rayon, etc.)
Elastic for the waistband
Sewing machine or needle and thread
Measuring tape
Scissors
Pins
Iron and ironing board
Steps:

Take Measurements:

Measure your waist where you want the pants to sit and add an extra inch for seam allowance.
Measure the length from your waist to your desired palazzo pants length (usually they are long and flowy).
Cut the Fabric:

Fold the fabric in half, right sides facing each other.
Using your measurements, mark and cut out two identical rectangles for the front and back panels. The width should be half of your hip measurement (plus seam allowance), and the length should be your desired length plus seam allowance.
For the waistband, cut a strip of fabric that is your waist measurement plus an extra inch for seam allowance and the desired width of the waistband (usually around 2-3 inches).
Stitch the Inseam:

With the right sides of the fabric together, stitch the inseams of both the front and back panels. This creates the inner legs of the pants. Use a straight stitch and backstitch at the beginning and end of the seam to secure it.
Stitch the Side Seams:

With right sides together, stitch the side seams, leaving enough space at the top for the waistband casing and the bottom for the hem. Again, use a straight stitch and backstitch to secure.
Create the Waistband Casing:

Fold the top edge of the pants down about 1 inch to create a casing for the elastic. Pin it in place, leaving a small opening to insert the elastic.
Insert the Elastic:

Measure a piece of elastic to fit comfortably around your waist. Thread it through the casing using a safety pin or elastic threader. Overlap the ends of the elastic by about 1 inch and stitch them securely together.
Close the Waistband Casing:

Once the elastic is in place, sew the small opening in the waistband casing closed.
Hem the Bottom:

Fold the bottom edge of the pants up twice to create a double-fold hem. Pin it in place and sew around the hem to secure it.
Press and Finish:

Iron your palazzo pants to smooth out any wrinkles and give them a polished look.
Try Them On:

Finally, try on your palazzo pants to ensure they fit comfortably and are the desired length. Make any adjustments if necessary.
With these steps, you should be able to create a simple pair of palazzo pants. Remember to choose a fabric that you like and that suits your style. Practice makes perfect, so don't worry if it's not perfect the first time; you'll improve with experience.

  / ahmedbeli10  

Related Keyword:
palazzo cutting,plazo cutting and stitching,palazzo cutting and stitching,palazzo pant cutting and stitching,সাধারণ প্লাজো কাটিং ও সেলাই,plazo cutting,সেলাই একাডেমি,কলি সহ প্লাজু কাটিং ও সেলাই,How to make a plazo cutting and stitching easy/কলি সহ প্লাজু কাটিং ও সেলাই,প্যান্ট প্লাজো কাটিং ও সেলাই,প্লাজো কাটিং ও সেলাই,plazo cutting step by step,plazo pant,plazo pant cutting,palazzo pant,diy palazzo pants,plazo pant design,প্লাজো কাটিং