2015-2017 Mustang Front Bumper Quik Latch Install

Описание: The 2015-2017 S550 Mustangs are known for their poor body lines. This quick fix will get your front fascia back in line with the fenders and add a nice custom look to your front bumper as well.

GET YOURS TODAY!
https://goo.gl/pJDCGt
________________________________________________________________
Don’t you hate it when those pesky front bumper clips break on your s550. Well, we have a quick, easy solution for you.

Hey guys, Jason here from Dallas Mustang. You’ll start to notice that the clips that hold your s550’s front bumper cover easily break or become brittle and will no long hold the body panel in place, we recommend using these quik latch mini’s. It’s a cheap and easy work around for a problem that could amount to hundreds of dollars.

Start by removing the front fascia from where it meets the front fender. You will see a black plastic piece with two bolts that will need to be removed for this install.

Insert the post provided in the quik latch packaging and tighten the two nuts on either side of the fender down. Make sure you do not over tighten the post with your rachet, since most likely you will need to readjusted later in the install.

Measure the distance from end of the headlight to the post and the top of the fender to the post giving you a cross section you can mark on your bumper cover.

We use painters tape to cover the area where will we will be drilling the front bumper cover. This allows us not only to easily see our measurement marks but also helps keep the paint from chipping where you are drilling. Drill your pilot hole where you made your marks.

Use a step down drill bit to open the hole up big enough to fit the latch portion provided in the quik latch kit. Be very careful in the step and take your time, you do not want to cause any damage to the paint.

Once you have finished with these steps pull the painters tape off and clean up the hole you just drilled. Make sure that the post lines up with the center of the hole
This is when you will make any adjustments needed to the post and tighten it down.

Now you will push the latch portion through the hole you just created and tighten it down with the provided nut.

Finally, line your front bumper cover up and push inward to snap your newly installed quik latch fix in place. It just takes a few minutes and proper measurement to easily fix your front fascia.
_________________________________________

WATCH SOME MORE VIDEOS…

2013 Mustang GT Dyno Tuned
   • 2013 Mustang GT Dyno Run - Custom Tuned  

2015-2017 Quik Latch Install
   • 2015-2017 Mustang Front Bumper Quik Latch ...  

2015 Mustang Ecoboost Dallas Mustang Velgen Collab
   • Style Your Ride - Velgen Classic 5  

Mustang Addicts Meet
   • Mustang Addicts Meet At Dallas Mustang  

FOLLOW US IN THESE PLACES FOR UPDATES
Facebook -   / dallasmustang  
Instagram -   / dallasmustangparts  
Google Plus - https://plus.google.com/+Dallasmustang
Twitter -   / dallasmustang