How to Disassemble and Maintain a Fat PS3

Описание: This is the process I perform on every FAT PlayStation 3 before I do anything else!
The 19 blade fan isn't absolutely necessary, but I highly recommend installing one. They can be found on ebay for ~$20.
The spray I'm using to clean with is 99.9% isopropyl alcohol, and I used some DeoxIT on that bit of corrosion I found on the edge of the board.

This is not the same 2032 battery socket I used in the video, but this looks like a good fit for this mod because it has pads for wiring the connector to: https://amzn.to/3ia0a6Q

Check out my Amazon shop!
https://www.amazon.com/shop/retrocution

DeoxIT Contact Cleaner - https://amzn.to/35Pzal5
Arctic Silver 5 Thermal Paste - https://amzn.to/2MpnIoy
Largest HDD for PS3 - https://amzn.to/34OqzNZ

Things I use all the time:
iFixit toolkit - https://amzn.to/2ZiyjXw
Soldering Iron - https://amzn.to/38Y61G6
Solder - https://amzn.to/34HUl7a
Soldering iron tip cleaner - https://amzn.to/2EJniov
Flux - https://amzn.to/35Pe7ir
Solder sucker - https://amzn.to/2PPp8up
Silicone Wire - https://amzn.to/35QoLWa
Auto Wire Strippers - https://amzn.to/2MnnIFn
Flush Cutters - https://amzn.to/394s265
99.9% Isopropyl Alcohol Aerosol - https://amzn.to/2Mo1vqG
Multimeter - https://amzn.to/2s44Y7b

*These are affiliate links. As an Amazon Associate I earn a commission on any purchases you make through these links. This really helps out the channel and I appreciate the help!*