Demonstration of epoxy adhesive used with heat shrink boot

Описание: See how easy it is to use V9500 Epoxy Adhesive when installing a boot to a connector.

HellermannTyton’s V9500 Epoxy Adhesive is ideal for sealing connectors used in the toughest environments. This cured epoxy adhesive meets the SAE specification of up to +200°C. It is also available in bulk for automated machine application.

Here are the application steps:
1. Insert the hardener and resin cartridge to the adhesive gun and screw on the special nozzle.
2. Apply adhesive to both ends of the heat shrink boot and the groove of the connector back shell.
3. Don protective wear and add a nozzle to the heat gun for precise heating.se a heat gun with a nozzle for precision.
4. Begin applying even heat at the H end - that means the fixed lip end of the connector.
5. Remove excess adhesive beyond the witness line with an alcohol wipe.
6. After curing is complete, perform a bend test.
Tip: The opened cartridge can be left in the applicator gun and stored in the fridge for use the next day.

► Further tips on how to prepare heat shrink products for installation
Link to Tutorial    • Sealing heat shrink shapes with hot melt a...  

► Product details for V9500 Epoxy Adhesive Kit:
https://www.hellermanntyton.com/produ...

Follow us!
• Blog: https://blog.hellermanntyton.com
• Twitter:   / hellermanntyton  
• LinkedIn:   / hellermanntyton_2  
• Facebook:   / hellermanntytonplc  
• Instagram:   / hellermanntyton  

For enquiries, please contact : [email protected]

► Click here to subscribe: http://bit.ly/HT_Youtube_Subscribe


MUTE#5