Alto TS410 Bluetooth Problems? Here's The Real Fix

Описание: Alto Pro TS4 Series | Frequently Asked Questions
How do I pair my TS4 speaker with a Bluetooth device?
To connect the speaker to a Bluetooth device follow these steps:
(The stereo link is only for Bluetooth signal only.
Mix Out does not include Bluetooth signal, only analog inputs. )
Hold down the pairing button for 3 seconds to initiate pairing.
The blue LED on the speaker will flash indicating that it is in pairing mode.
Navigate to your device's Bluetooth device list and select ”Alto TS408,” “Alto TS410,” “Alto TS412,” or “Alto TS415” to connect.
Once paired there will be a voice prompt stating the connection was successful, and the blue LED will be lit solid.
Note: Pressing the pair button while in pairing mode will cancel the connection.
How do I stereo-link two TS4 speakers?
The TS4 speakers have a stereo link mode that will allow two TS4 speakers to be paired wirelessly. To set up the stereo link mode do the following steps:
Connect one speaker to Bluetooth following the steps above. This will be the primary speaker.
Hold the pairing button for 3 seconds to initiate stereo link. Do this for both speakers.
Both speakers will beep to indicate they are in scanning mode, and the orange LED will blink. When they find each other, they will link automatically.
Once the two speakers are successfully linked, there will be a confirmation chime, and the Orange LED will be lit solid.
Press and hold the pair button on either speaker to disconnect.
Once the speakers are in the stereo link, the Bluetooth Volume knob on either speaker will control the volume for both speakers
Notes:
If you link the speakers first, only one speaker will connect to Bluetooth.
If pair mode is activated on both speakers (pair button held for 3 seconds), you may encounter trouble linking until pair mode is cancelled or times out.
The stereo link is only for Bluetooth signal only.
Mix Out does not include Bluetooth signal, only analog inputs.

TS410
2000-WATT 10-INCH 2-WAY POWERED LOUDSPEAKER WITH BLUETOOTH®, DSP & APP CONTROL
2000 W peak (1300 LF + 700 HF), 1000 W continuous RMS (650 LF + 350 HF)
FREE Alto App (iOS/Android) for remote configuration and control
Bluetooth® audio streaming direct from device
On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
True Wireless Stereo speaker linking via Bluetooth®
Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
XLR Mix output, Speaker Use, and Sub Size Controls
10” driver, 2.0” (50 mm) high-temperature voice coil
1” exit ceramic driver with 1.4” (35 mm) coil
Lightweight enclosure for easy transport, set up and installation
Versatile design - pole-mountable, wedge monitor or flown application with integral M10 suspension points
Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
Designed and tuned in the USA

🔴 Subscribe For More Great Videos from 🌴 https://www.youtube.com/c/expertislan...

Some products may have been supplied by the manufacturers for the Making of this video.
As a Guitar Center affiliate, I earn from qualifying purchases.
As an Amazon Associate, I earn from qualifying purchases.