Jeep WJ Window Regulator Replacement
Автор: The Fun Fix
Загружено: 2019-02-21
Просмотров: 4390
Описание:
Replacing the front driver side door window regulator on a 2001 Jeep Grand Cherokee WJ.
The only tools needed:
• Trim Removal tool
• 10 mm socket
• Phillips and Flat screw drivers
• T25 Torx screw driver
Start by removing the door card. There are 2 Philips screws, one in the door grab handle and one close to the mirror, and one Torx screw behind the door opener. Remove these and then pop the trim tabs off with the trim tool. Disconnect the actuator arms and wiring harness from the door card and remove the door card.
Remove the speaker by undoing the 4 Philips screws and unplugging the harness. Then remove the moisture barrier. Mine fell apart upon removal.
Disconnect the regulator wiring harness and feed it into the door. Remove the window retaining clips from the regulator and pop the window tabs off the regulator. Loosen and remove the regulator mounting bolts (4) and motor mounting bolts (3). Manually lift the window and remove the defective regulator.
Installation is the reversal of removal.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: