How To Replace Mass Airflow Sensor (MAF) 1993-1997 Ford Ranger 3.0L

Описание: Buy Now!
New Mass Air Flow Sensor from 1AAuto.com https://trq.video/ia-WKEAF00005

This video shows you how to install a mass airflow sensor on your 1993-1997 Ford Ranger (3.0L). The Mass Air Flow (MAF) sensor determines the mass flow rate of air entering your vehicle. A trouble code indicating the sensor is not working properly could be because it is dirty, malfunctioning, or damaged, in which case your vehicle may run poorly or enter limp mode. Fortunately, sensors are typically easy to replace.

This repair was done on a 1996 Ford Ranger XL 3.0L Extended Cab Pickup 2-Door RWD and the process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oEw-1AXAA00013
• 10mm Socket https://trq.video/ozT-1AXAA00017
• Ratchet https://trq.video/oHm-1AXAA00016
• Socket Extensions https://trq.video/oEu-1AXAA00015
• Pick https://trq.video/ogI-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Ford Ranger 2nd Generation 1993-1997:    • Ford Ranger 2nd Generation 1993-1997  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.