How to Make The CUBE Leather Camera Bag

Описание: In this video we will show you how to make the CUBE Leather Camera Bag. This cross body bag is lined with leather and stiffener.

This can be used also as a tool bag.

The advantage of lining is that you obtain a sturdy bag that will keep its shape over the years.

It also allows you to use thinner leather that will ensure the bag is lightweight. This bag weighs 2.53 pounds (1.15 kg).

Link to the PDF Pattern:
✅ https://www.etsy.com/listing/1059038929/
✅ https://bit.ly/3il1QuY

Featuring adjustable strap and handle, this bag can be used as a camera bag. There's ample room for a DSLR or mirrorless camera with an attached lens. There's also two handy exterior pockets for phone, keys, memory cards or batteries. The shoulder bag contains in addition a front pocket.

The camera bag features a removable full leather strap which can be easily adjusted to preferred lengths. The bag can be carried by the hand handle, worn on the shoulder or cross-body. It can also be used as your everyday bag.

This project requires around 7.5 sq ft (0.7 sqm) of 4-5 oz (1.6-2 mm) leather for the body of the bag, about the same for the leather lining, around 5.4 sq ft (0.5 sqm) of PITEX Non-woven leather stiffener (or other stiffener for leather bags like Texon), some 9 oz ( 3,6 mm) leather for the contrast.

You will need some leather and some lining for the shoulder strap: the longest piece is around 43.3” (110 cm).

You will find a list of materials, hardware and tools in the PDF pattern file. There is also a link to the video tutorial.

SPECIFICATIONS
Adjustable shoulder strap (long up to 63” - 160 cm)
Handle
Front pocket
Side pockets
Wings for protecting the content of the bag

DIMENSIONS (inside)
BAG
Height: 20 cm (7.9”)
Length: 20 cm (7.9”)
Width: 14 cm (5.9”)
POCKETS
Height: 13 cm (8.3”)
Length: 9.5 cm (8.3”)
Width: 4 cm (5.5”)

MATERIALS
BODY: around 7.5 sq ft (0.7 sqm) of 4-5 oz (1.6-2 mm)
LINING: around 7.5 sq ft (0.7 sqm) of 1.5-2 oz (0.6-0.8 mm) pigskin
LEATHER STIFFENER: around 5.4 sq ft (0.5 sqm) of PITEX Non-woven leather stiffener or other stiffener for leather bags like Texon
CONTRAST LEATHER: around 2.1 sq ft (0,2 sqm) 9 oz ( 3.6 mm) leather
leather glue
1 mm waxed polyester thread
edge dye
cardboard and paper masking tape (for assembling the pattern)

HARDWARE
1 x LOXX (optional) You can use other closing systems like Sam Browne studs or none at all.
2 x 0.79” (20 mm) buckle
2 x 1.18” (30 mm) buckle
2 x 0.79” (20 mm) D rings
2 x 0.98” (25 mm) D rings
2 x 1.18” (30 mm) swivel hooks

Where to find LOXX closing system
www.loxx.shop/en/individualparts
You should order ALL these parts:
Loxx lower part for fabric - vintage brass, Item# 1200
Loxx upper part smooth head - vintage brass, Item# 1191
Loxx high washer for 1-4 mm clamping area Farbe: Altmessing, Item# 1785

TOOLS & EQUIPMENT
cutter
needles
1.5 mm hole punch
cutting mat
mallet

PITEX stiffener: https://www.etsy.com/sg-en/listing/90...
Texon stiffener: https://www.etsy.com/listing/829312689

Enjoy!

MORE PATTERNS HERE:
https://www.etsy.com/shop/PlagueDocto...
http://leatherpatterns.net/

Check here the Instructions for How to print the pattern:    • How to Print Leather PDF Patterns in Adobe...  

If you need assistance for this project, please contact us on our Facebook Group:   / leatherpattern3dprintedmolds  

**FOLLOW US**
FACEBOOK
  / vasileandpavel  
  / pavelcrafts  

INSTAGRAM
  / vasileandpavel  
  / pavelcraftleather  

©️ 1988-2021 Vasile and Pavel (https://vasileandpavel.com/)

#leatherbagpattern #leathercamerabag #theCubeBag #leatherbagPDF #boxshapedbag