How to Replace Valve Cover Gasket Set 2000-2006 Honda CR-V

Описание: Buy Now!
New Valve Cover Gasket Set from 1AAuto.com https://trq.video/ib-1AEGS00342

This video shows you how to install a new set of valve cover gaskets on your 2000-2006 Honda CR-V. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!

Estimated installation time for a professional technician is approximately: 36 minutes

This repair was done on a 2006 Honda CR-V LX 2.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V

Tools you will need:
• Pry Bar https://trq.video/oatf-1AXAA00020
• 10mm Socket
• 30mm Socket
• 8mm Socket
• Pliers
• Ratchet
• Socket Extensions
• Bungee Cord
• Cloth Rags
• Dielectric Grease
• Gloves https://trq.video/ocsa-1AXSS00048
• RTV
• Safety Glasses
• Hammer

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.