DIY - CDE Cone Pattern - Equestrian Carriage Driving

Описание: DIY - CDE Cone Pattern - Equestrian Carriage Driving

Hello, my name is Wade Boelter and recently I posted several photos and a video on Facebook of a DIY project that allows you to make your own CDE Cones from my pattern. I also have found suggested optimal materials to use. This is a great way to create a full cones course hazards for a schooling show or marathon event. Super Neat and Ingenious!

Please Visit my online store "Wade's Equestrian Collections" and purchase your Cone pattern today!

https://squareup.com/store/wadeseques...

DIY - CDE Cones with the suggested materials brings your cost down to $4.00 ea. cone and of course your labor.

A paper CDE Hazard Cone pattern for a Equestrian DIY - (do it yourself) build your own Hazard Cone project.

Cone from pattern will measure 20" height and the base diameter will measure 17" with a 62* degree angle. The Ball hole measures 1.5" diameter. The Cone weight upon the finish of your project with recommended materials will be 1 lbs 4 oz.
***Note: To add more weight to your cone simply punch and zip tie chain link to the off side of Carriage travel and to the inside base of your cone.

Compare with FEI CDE Cone Specs below
1. Material: Plastic, Stable enough for use and indestructable.
2. Height: 30-50cm or 11.81"-16.74"
3. The Platform: ca 400 x 425mm or 15.74" x 16.73"
4. Angle: 60 degrees
5. Ball hollow on the top of the cones: 40mm diameter or 1.57" diameter
6. Color: No restriction
7. Weight of the cones: min. 2.5kg or 5.51lbs.

*****Recommended Material for cone construction:
Plas-Tex Waterproof Wall Panel 0.060 x 4 x 8 (5 large cones). Manufactured by Parkland Plastics www.parklandplastics.com 800-835-4110 Retailed through your local Menards or Home Depot hardware store.

Tools required to assemble:
1. Pen or marking pencil
2. Tin snips
3. Quality One Hole punch or Tap punch
4. Zip ties