How to Extend Fascia on a Shed with Gusset Roof Rafter Framing

Описание: https://www.homebuildingandrepairs.co... - This video addresses a viewer question regarding how to extend the fascia board on a shed built with gusset construction. While gusset construction is not always the preferred method for every builder, there are specific techniques to effectively extend the roofline for an overhang. In this tutorial, we demonstrate how to modify the framing at the gable end to support a fascia extension.

Part 1 - Plywood Ridge Rafter Ties Verses Conventional Roof Framing For Small Sheds - Building Better Roofs -    • Plywood Ridge Rafter Ties Verses Conventio...  

Key steps covered include:

Ridge Board Extension: How to replace the end gusset with a solid ridge board extension, similar to conventional framing, to support the overhang.

Blocking and Spacing: The importance of blocking the ridge and properly sizing the ridge board relative to your rafter size (e.g., using larger stock for 2x6 rafters vs. 2x4).

Lookout Installation: Instructions on spacing "lookouts" (typically 32 inches on center) and notching them into both the gable rafter and the extended ridge board for structural integrity.

Proper Alignment: Tips on lowering the extended ridge board slightly to match the roof slope without complex shaping.

Whether you are working with 2x4 rafters or larger lumber, this walkthrough provides a "fast and easy" method to achieve a professional fascia finish on your shed.