How to replace a chainsaw bar - step by step tutorial

Описание: Replacing the 16 inch bar on my Stihl Farm Boss MS290 with a new 20 inch bar. This process is the same for most Stihl chainsaws. This is a step-by-step tutorial how to change the bar and chain on your chainsaw. MS290 MS271 MS261 MS211 MS250 MS251 Wood Boss MS181 MS194 MS291 MS311 MS391 MS362 MS462 MS500i MS661 MS881 Stihl chainsaw. Husqvarna. How to replace chainsaw bar. How to change chain saw bar. #stihlchainsaw #chainsawbar #outdoorgans #howto #tutorial #purplecollarlife #stepbystep

Step 1: Locate "scrench" new bar and chain
Step 2: Use scrench to loosen two bolts holding bar holder
Step 3: Loosen chain tension
Step 4: Remove case side after removing the two nuts
Step 5: Remove chain from sprocket and bar
Step 6: Remove old bar and place new bar (use locating pin)
Step 7: Install new chain by placing around the bar tip and down top edge of bar
Step 8: Loosen bar chain if necessary to place over engine sprocket
Step 9: Align chain and tighten slightly
Step 10: Replace side case and finger tighten nuts
Step 11: Tighten chain using tensioner screw
Step 12: Tighten retaining nuts
Step 13: Start saw to make sure chain moves freely

Please subscribe to our channel here: https://www.youtube.com/c/PurpleColla...

Our Facebook Page   / purple-collar-life-107918060952197  
Our Instagram https://www.instagram.com/purplecolla...

Partners and Sponsors
Toro: https://www.toro.com/en
Artillian: https://www.artillian.com/
Curtis Industries: https://curtisindustries.net/

OUR EQUIPMENT LIST
John Deere 2210 Compact Tractor
Toro TIMECUTTER
Split-Fire 2265 two-way Log Splitter
Polaris Ranger
Ford 8N
Ford 641 Workmaster
Yamaha XT250 dual sport motorcycle
Stihl chainsaws

We live in Northwestern PA and have around 70 Acres of Land, in the middle of family homestead land from more than 4 generations back. We have one daughter, one rescued Great Dane, and one cat. We enjoy working on our property and making improvements. We enjoy tractors, chainsaws, splitting firewood, rural living, and all purple collar life projects. Our day jobs are primarily white collar job, but our rural life is full of blue collar and purple collar activity. #purplecollarlife

YouTube Community guidelines:
   / howyoutubeworks  

The content of this video is intended for entertainment purposes only.

Clicking on the affiliate links does not cost you any more, but does give us credit for sending you to Amazon. *We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Amazon affiliate links:
3M Worktunes AM/FM Bluetooth: https://amzn.to/3RrSzzN
Protective clothing combo kit - https://amzn.to/3Cii8ie
Husqvarna 579380210 Functional Saw Protection Gloves, Large: https://amzn.to/3Qv1al1
STIHL 26RS 81 Rapid Super Chainsaw Chain 20" Bar .325 pitch .063 gauge: https://amzn.to/3BOv0eh
STIHL 3003 008 8921 Rollomatic E Laminated Sprocket Tipped Chain Saw Bar, 20-Inch:
Stihl Genuine 3003 000 5221 20-inch Guide Bar Rollomatic: https://amzn.to/3Sx6YLw

Thank you for your support.
Email: [email protected]
#purplecollarlife

Published September 29, 2022
Current subscriber count at the time of upload: 10,353
Purple Collar Life is a privately owned channel and part of Education Situation Specialists.

Sponsors: Toro, Artillian, Curtis Industries, Earthway, Andersen, B&W Hitches

0:00 - Intro
1:30 - MS290 Farm Boss 16 inch to 20 inch bar change
2:20 - Step 1: Locate "scrench" new bar and chain
2:50 - Step 2: Use scrench to loosen two bolts holding bar holder
3:15 - Step 3: Loosen chain tension
3:35 - Step 4: Remove case side after removing the two nuts
3:58 - Step 5: Remove chain from sprocket and bar
4:35 - When to flip bar over (reverse)
5:14 - When a bar needs replaced
5:44 - How the automatic oiler works with the Stihl bar
6:11 - Step 6: Remove old bar and place new bar (use locating pin)
7:10 - Step 7: Install new chain by placing around the bar tip and down top edge of bar
8:23 - Step 8: Loosen bar chain if necessary to place over engine sprocket
8:50 - Step 9: Align chain and tighten slightly
9:14 - Step 10: Replace side case and finger tighten nuts
9:54 - Step 11: Tighten chain using tensioner screw
10:15 - Step 12: Tighten retaining nuts
12:30 - Step 13: Start saw to make sure chain moves freely
13:30 - Leave those comments and tips below