How to Set Up, Turn On & Secure your Lunderg Early-Alert Bed Alarm

Описание: For questions or customer service please contact us at [email protected]
Get your Lunderg Early Alert Bed Alarm here: https://lunderg.com/bed-alarm/
Full Instructional video:    • Lunderg Early Alert Bed Alarm - FULL INSTR...  

Hello and thanks for your purchase.

My name is Shawn and today I’m going show you how to set-up, turn on and secure the Lunderg Early-Alert Bed Alarm System, in under 2 minutes. To unlock the full potential of this groundbreaking fall prevention system please also watch the full instructional video.
Ok let’s get started

I’ve already removed the components from the box.
First I will put the batteries into the monitor by using the screwdriver.

Then I’ll loop the bands through the clips and eyelets on the pad. There are four each.

Before I attach the pad to the bed I will pull back the sheet and turn the pad on by opening the transmitter pocket. Since this is a king-sized bed I will set the pad to TX-Only and place it on one side of the bed. NEVER SET IT IN THE MIDDLE!

Next I’ll turn on the monitor.

Now I’ll press the “PAIR” button on the monitor until the status LED light turns a steady green. Make sure to complete the pairing before the lights turns off!

Now press and release the center zone of the pad to pair it with the monitor. The Status LED light won’t be steady anymore and the Sensor 1 red LED light will blink once to indicate it has been recorded. Just to be safe, let's do a quick test.

Now I will position the sensor pad across the bed beneath where the hips of the patient will be, and I will also make sure the neck of the pad is hanging off the edge of the mattress.

I’ll secure the pad to the bed, using the clips and rubber bands.
Pull the bands tight so the pad will have minimal movement and greatly reduce false alarms.

Looks great. Now cover it with the fitted sheet.

Congrats and nice work! For more comprehensive instructions please watch the full instructional video & read the user manual.

If you have any questions please contact us at [email protected] and we will reply in less than 24 hours!
Thanks!