High Speed Automatic Paper Tube Cutting Machine

Описание: This tube re-cutting machine is designed for high quality high speed re cut cores cut from a parent core in the ranges set out below, the machine is available with 3 loading options reducing the need for manual loading on each level, programmable via a friendly touch screen interface to the front of the machine. To begin, the operator enters the cut length and the wall thickness. If this is the first core to be cut, the knife cutting position against the inner cutting anvil is set with the press of a button requesting the machine to automatically ‘teach’ the cut position. The long parent core is placed into a loading ‘V’ in front of the machine, the operator pushes the core into the chuck and presses the start button. The machine will take over from here, closing the chuck jaws to grip the core, then moving the chuck carriage into the machine to draw the parent core inwards, over the cutting anvil. The length of the core is carefully calculated as it is loaded, with a parameter from 1620mm up to maximum length of 2160mm machine may be presented for loading into the machine. The machine will automatically compensate for short parent cores of up to 540mm without manual intervention. This allows for some flexibility in parent length with disruption to the production run rate.
The machine may store multiple programmes which may then be pre-selected and executed. Each programme has the potential to store 5 different cut lengths and number of cuts to execute as a sequence. The cutting may be paused at any time to make changes to the running programme or to switch to another programme
 Opposed knife units are used for rapid cutting and the cutting action is via a servo controlled ball screw. This allows the optimum knife speed and movement to be set for a particular core
 The machine can be connected via USB to enable remote diagnostic and problem solving by Spiraltech Engineers.
 Tooling for each size comprises of only a clamping dolly for the chuck and a cutting anvil or cutting dolly.
 A touch screen control panel is mounted near the operating area for ease of use
 The knives have micro adjustment and soft stop to the cutting dolly and quick release change over.