Chevrolet Equinox - Replace Tail Light | Reverse / Turn / Brake Light Bulb (2010 - 2017)

Описание: Step-by-step guide on how to change / remove tail light assembly and change any of the tail light bulbs (rear turn signal light bulb, brake / stop light bulb, reverse light bulb) on Chevy Equinox SUV ( 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | LS | LT | LTZ ).

Removing or replacing tail lights in easy and fast. First you have to remove 2 small black covers on top of the tail light mounting screws. Then remove the screws (you will need 10mm socket and a ratchet or a phillips screwdriver). Now the tail light will be completely loose, but still held by 2 small pins on the side. You want to gently pull tail light towards yourself. If it is "stuck" try using a bit of duck tape to pull on it or gently pry with a plastic trim remover.

Once the tail light is out you can turn the bulb sockets counter clockwise to remove any of the bulbs and replace them.

Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.